|
Post by stevenwong on Oct 14, 2008 20:22:35 GMT 8
Thanks Dennis Managed to install the 2 flap servos (2 pcs Hitec HS5955TG), 2 aileron servos (JR DS3401) and 2 rudder servos (JR DS3301). It took some time because the inside of where the servos are to be placed is bare, had to make pieces of hard wood for the servo support. Still a long way to go but enjoying the build very much. ;D Will update with more pictures as it goes along.
|
|
|
Post by stevenwong on Oct 15, 2008 13:11:46 GMT 8
Strobe and Navigation lights installation. I'm using 'ultra bright' LEDs, with some Lumeon super bright LEDs. It is very bright during the day!
|
|
|
Post by stevenwong on Oct 29, 2008 10:31:46 GMT 8
Finished installing these aileron and flap hinge covers.
|
|
|
Post by stevenwong on Oct 29, 2008 10:34:59 GMT 8
Also just finished installing and routing LED nav lights on the 2 main wings. Had to use long drill bits to pierce thru the middle of the wing to run the wires. Took quite a while to do this as i had to be careful not to drill into the wrong supports inside the wings. Phew!
|
|
|
Post by stevenwong on Nov 12, 2008 10:13:43 GMT 8
|
|
|
Post by stevenwong on Dec 2, 2008 9:51:30 GMT 8
Thanks Dennis for the encouragement over the phone! Appreciate it. Have been working hard painting the jet. Rudders and elevators are now done. Dorsal antaenna added. Undercarriage oil stains and weathering done. Door details added. More stickers added.
|
|
|
Post by stevenwong on Dec 2, 2008 10:00:40 GMT 8
|
|
|
Post by derrick on Dec 2, 2008 12:45:15 GMT 8
Hi steve, Very nice work and weathering details!!! Keep it coming bro! Also if you have a confirmation of it's maiden, please email me as I wish to witness this masterpiece in flight! Soooooooo nice!
|
|
|
Post by dennisp on Dec 2, 2008 18:17:46 GMT 8
Great job Steven with super detail.....
|
|
|
Post by stevenwong on Dec 2, 2008 23:24:35 GMT 8
Thanks guys! Once i am ready to fly her, I will inform you Derrick.
|
|