|
|
Post by gjo0228 on Dec 7, 2010 12:29:34 GMT 8
throttle curve is normal 0-25-50-75-100 but the motor will just start when it is at mid stick.i tried setting the throttle curve at 0-50-50-75-100 but it is still starting at mid stick.i'm using a DX6i and an AR6200.ESC setup is the default settings.my heli is the RTF KDS450SV.please help.
|
|
|
|
Post by SKYHOBBIES on Jan 23, 2011 0:55:51 GMT 8
Hi,
Try to recalibrate your ESC to your TX.
1) Put your Throttle Stick to Maximum "UP" Position.
2) Power up your ESC (Plug in your lipo)
3) Wait for 3 secs, you will hear an acknowledgement beep on 1 long and 1 short beep follow by 5 sec of silence before programming sequence kicks in.
4) Before the programming sequence kicks in on th 5th sec, pull down your throttle stick.
5) 2 short beeps to complete.
6) Unplug your Lipo and reconnect back as per normal flying start up.
Hope it helps!
Cheers!
|
|
