|
|
Post by tmuzaffar1 on Aug 8, 2010 0:55:08 GMT 8
I always have trouble in choosing the right glue for Depron models and end up using Epoxy which is very inconvenient and makes the model heavy. Can anyone suggest what glue I should use and if available at Sky hobbies.
Thanks
|
|
|
|
Post by SKYHOBBIES on Aug 8, 2010 9:59:48 GMT 8
You are right. Epoxy increases the weight when over exccessive application. There are Foam-Safe CA available in the market and we carry the ZAP Faom CA.
Usually most modellers apply the Foam CA together with Foam Safe CA Accelerator (or Kicker which is a spray-type alcohol based) to speed up the curing process within seconds.
I advise you to get both.
Cheers
|
|
