|
|
Post by SKYHOBBIES on May 24, 2010 23:42:15 GMT 8
OK Capt.. as discussed the wing span still a little short. that wing span means a flying weight limit so when the system setup with more than 1KG then you will need a speed to keep it afloat! 74" will be a min. the one you show seems to be the same as those J** and Ch*** are selling!! Thanks for the info. ok thanks for the friendly advise. This is the actual amphibious baby which I mentioned to you and Alan 2 Sundays ago...  Length¡G 1150MM Wingspan: 1800MM Weight¡G2.5KG Lipo : 22.2V 2800-3200MAH 25C (Not Included) Motor: Outrunner 3740 KV400 (Not Included) ESC: 60A (Not Included) Prop Size: APC 1108E OR 1260E (Not Included) Landing Gear : Retracts with wheels (Included) Flight Time: 20-30mins |
|
|
|
Post by SKYHOBBIES on May 24, 2010 23:43:33 GMT 8
Just watched your video again really silky smooth flying Capt. thanks for sharing. Is that really the RMS site at Tuas...? or ..? haha... thanks! Nope, it is Aerofly Pro Deluxe - SIM... |
|
|
|
Post by dt8666 on May 25, 2010 10:09:36 GMT 8
GREAT seaplane... what is going to be the $$ looks like???
For the F3A, do you have the flight pattern on PDF of any e-paper format to send across? Saw the video and it was nice and great added text to explain on each procedure. Welldone!!
looks like I should also start with some soft finger with the model now and to register for the event!!
|
|
|
|
Post by SKYHOBBIES on May 25, 2010 10:26:07 GMT 8
the Basic maneuver list can be downloaded directly here : www.rms.org.sg/rms/images/basicaero/rules.pdfDo note that for "humpty-bump", I have crossed checked with Mr Low that the entry-point must be after the center line, not before as shown on the arresti diagram. You can cross check that with Johnny to affirm that pls... |
|
|
|
Post by dt8666 on May 25, 2010 13:17:07 GMT 8
Thanks... what ever the guideline, will use the one from the link you provided. hehe
cheers!
|
|
|
|
Post by dennisp on May 29, 2010 9:50:54 GMT 8
Just received a un-edited video of a practice of 3D aerobatics for a contest to be held soon in Melbourne in Australia. Not quite the same graceful smooth flying of normal aerobatics but interesting to watch. Oh yes Capt. this is pilot I built the PA Extra260 for which he flies the same routines. www.youtube.com/watch?v=KDMiVBTsmFY The model is a Hanger 9 kit with a DA180 gasser up front, far too noisey for UK use as this would banned from all flying sites. |
|
|
|
Post by dennisp on May 29, 2010 9:55:56 GMT 8
OK Capt.. as discussed the wing span still a little short. that wing span means a flying weight limit so when the system setup with more than 1KG then you will need a speed to keep it afloat! 74" will be a min. the one you show seems to be the same as those J** and Ch*** are selling!! Thanks for the info. LOL that is a nice looking model well suited to the current rain that we seem to get everyday here in Singapore...!! ok thanks for the friendly advise. This is the actual amphibious baby which I mentioned to you and Alan 2 Sundays ago... Length¡G 1150MM Wingspan: 1800MM Weight¡G2.5KG Lipo : 22.2V 2800-3200MAH 25C (Not Included) Motor: Outrunner 3740 KV400 (Not Included) ESC: 60A (Not Included) Prop Size: APC 1108E OR 1260E (Not Included) Landing Gear : Retracts with wheels (Included) Flight Time: 20-30mins |
|
