Post by SKYHOBBIES on Aug 17, 2008 17:17:17 GMT 8
LANDER 68mm Metal Special Edition FAN coming late August 2008.
Experience the remarkable performance of the Turbine Feel out of the EDF.
This is the very first EDF Systems that are pre-assembled, matched , test run and balanced by the factory.
NEW! Most 68-70mm EDF units are constructed from plastics. However as EDF units produce high temperatures this can have adverse effects on power outputs not to mention motor and ESC problems due to overheating. It can cause loss of power or damage to these components. Some manufacturers have added 'Alloy rings' into the EDF unit to help deal with these issues but now, Lander Technology has designed their new 68mm unit specifically taking this issue to mind.
The whole shroud (including the tail pipe) is constructed from CNC cut Aluminum. This means the whole EDF unit acts as one large heatsink keeping the motor much cooler and increasing performance to its maximum. The 2848 4370KV Brushless Motor is factory installed having been fitted using thermal grease between the motor and shroud. (Thermal Grease is the material normally used in computer CPU Heatsink manufacturer).
Suitable For single EDF Jets with Flying Weight of between 900g - 1300g & Twin EDF Jet with Flying Weight 1,800 - 2300g with 3S (11.1V) Battery Packs. Models like GWS EDF Jets and the like will get a massive power boost with this EDF unit! In fact our new Panther uses the very same unit!
Specifications:
* Factory Tested and run
* Outside Diameter: 73mm
* Rotor Diameter: 68mm 5 Blades (fitted)
* Material: ABS & Special Aluminum
* Weight: 247g (unit with motor)
* Brushless Motor Type: 2848 (fitted)
* Motor Kv: 4,370KV (included)
* MAX RPM: 45,000 rpm
* Max Power: 700W
* Battery Required: 11.1V 2500 - 4000mAh
* Static Thrust: 1,100 - 1,200g
* Current: 50-55A
* Required ESC: 60A and above
* Required Battery: 2500 - 4000 3S1P (use at least 20C. 25C or 30C Best)
Experience the remarkable performance of the Turbine Feel out of the EDF.
This is the very first EDF Systems that are pre-assembled, matched , test run and balanced by the factory.
NEW! Most 68-70mm EDF units are constructed from plastics. However as EDF units produce high temperatures this can have adverse effects on power outputs not to mention motor and ESC problems due to overheating. It can cause loss of power or damage to these components. Some manufacturers have added 'Alloy rings' into the EDF unit to help deal with these issues but now, Lander Technology has designed their new 68mm unit specifically taking this issue to mind.
The whole shroud (including the tail pipe) is constructed from CNC cut Aluminum. This means the whole EDF unit acts as one large heatsink keeping the motor much cooler and increasing performance to its maximum. The 2848 4370KV Brushless Motor is factory installed having been fitted using thermal grease between the motor and shroud. (Thermal Grease is the material normally used in computer CPU Heatsink manufacturer).
Suitable For single EDF Jets with Flying Weight of between 900g - 1300g & Twin EDF Jet with Flying Weight 1,800 - 2300g with 3S (11.1V) Battery Packs. Models like GWS EDF Jets and the like will get a massive power boost with this EDF unit! In fact our new Panther uses the very same unit!
Specifications:
* Factory Tested and run
* Outside Diameter: 73mm
* Rotor Diameter: 68mm 5 Blades (fitted)
* Material: ABS & Special Aluminum
* Weight: 247g (unit with motor)
* Brushless Motor Type: 2848 (fitted)
* Motor Kv: 4,370KV (included)
* MAX RPM: 45,000 rpm
* Max Power: 700W
* Battery Required: 11.1V 2500 - 4000mAh
* Static Thrust: 1,100 - 1,200g
* Current: 50-55A
* Required ESC: 60A and above
* Required Battery: 2500 - 4000 3S1P (use at least 20C. 25C or 30C Best)