|
Post by SKYHOBBIES on Jun 28, 2008 23:03:57 GMT 8
EDO F4 PHANTOM (64mm EDF)Length: 1000mm ( 39.5 in ) Wingspan: 628mm (24.7 in ) Flying Weight:: Around 620g EDF diameter: 64mm (Installed) Motor: 4300Kv (Installed ) ESC: 30A ESC (Installed) Servo: 4 X 9g Servo (Installed) Battery: 11.1v 1,800mAh - 2,100mAh 15 - 20C (Not Include ) The F-4J Phantom II Advance Receiver-Ready Version Comes Out Of The Box Is 90% Finished And With 4 Servos, Brushless ESC & Ducted Fan System Installed, Just Need To Add Your Own Receiver & Battery Only ! ORDER HERE : www.skyhobbies.com.sg/electric_models_EDF.htm
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:05:42 GMT 8
Canopy done out of the box.... we were greeted by 2 pilots already in the canopy... and they are only 2 Dimensional
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:08:00 GMT 8
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:08:39 GMT 8
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:09:48 GMT 8
These are the 2 screw fasterners for easy removal and replacement of the 64mm Fans under the belly.
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:10:44 GMT 8
Molded missles on the fuselage with the front steering coupler for the nose gear...
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:12:57 GMT 8
Elevator with cut-out control surface. Note - You have to cut the control surfaces out according to the instruction manual as it is pre-molded.
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:13:46 GMT 8
Here are the other 2 pods for the main wings...
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:14:22 GMT 8
Closeup of the NOSE!
|
|
|
Post by SKYHOBBIES on Jun 28, 2008 23:15:52 GMT 8
The parts are not too difficult to identify as they are categorize properly. The Fan, Motor, Servos and ESC are pre-fitted.
|
|