|
|
Post by taz5176 on May 20, 2008 11:24:35 GMT 8
hi all
will be getting the hyperion balancer.
was wondering how the balancer actually works? to bring the cells in a pack to the same voltage?
thx
|
|
|
|
Post by SKYHOBBIES on May 20, 2008 13:21:48 GMT 8
Hi taz5176, The LBA10 balancer main purpose is to balance all the individual cells in your lipo to a min tolerance level of 0.01V differences in each cell. There is a datasheet of the LBA10 on our website which can share with you more. Btw, welcome  |
|
|
|
Post by taz5176 on May 20, 2008 14:01:42 GMT 8
thx. sorry im not clear with my ques, im more interested in how balancer works during balance charging?
when a pack (eg 2s lipo) is charged with the balancer, how the 2 cells maintain a balanced voltage? does the balancer charge the cells individual? <- the wires in the balance plugs are quite thin (not sure of the AWG), i don't think it can take 5-6A charging current.
so how does balance charging works in a balancer?
|
|
|
|
Post by SKYHOBBIES on May 20, 2008 16:24:32 GMT 8
The balancer has 2 main leads (Black / Red) to be connected to the battery main leads. The balancer connector connects to the lipo balancer cord for balancing only. The main charging is actually done on the main leads (Black / Red wires), while the balancing cord actually does the balancing function only - not charging. you can refer here for more information : www.aircraft-world.com/prod_datasheets/hp/lba10/lba10.pdf |
|
|
|
Post by SKYHOBBIES on May 20, 2008 16:26:13 GMT 8
allow me to borrow an illustration:  |
|
