|
|
hs55
May 11, 2008 2:07:45 GMT 8
Post by motosnake on May 11, 2008 2:07:45 GMT 8
help I'm lost............. can anyone help me how to conect hs55 servo to a esky std rx for hbk2
|
|
|
|
hs55
May 11, 2008 2:16:45 GMT 8
Post by SKYHOBBIES on May 11, 2008 2:16:45 GMT 8
Hi motosnake,
Welcome!
Can you describe what problems are you facing now?
As far as we are concern, all receivers should accept any servos. The only thing to take note is the polarity placing of the servo wires. Check your Esky Manual if it ever states anything about servo polarities.
We cannot diagnose anything until you describe what actually went wrong.
Regards
|
|
|
|
hs55
May 11, 2008 2:24:22 GMT 8
Post by motosnake on May 11, 2008 2:24:22 GMT 8
the prblem is when power up it goes to neg pitch and when power down it goes to pos pitch,if it polarites issue should I just reverse the connecter
|
|
|
|
hs55
May 11, 2008 3:13:37 GMT 8
Post by SKYHOBBIES on May 11, 2008 3:13:37 GMT 8
If all your servos are moving, that means the servos are working fine.
The only thing you need to do now is to reverse the "Pitch" channel on your transmitter. There should be a few "REVERSE" switches on your transmitter, try those but avoid reversing the throttle as it might spool your heli up if you hit the throttle reverse switch.
Best is to remove your main blades before doing so if you are not sure...
|
|
|
|
hs55
May 11, 2008 12:10:06 GMT 8
Post by motosnake on May 11, 2008 12:10:06 GMT 8
have done that but it doesnt work,now Might cinsider changing back to stk servo for the cyclic. thk
|
|
