Huge 500 Build - Trex | SKY HOBBIES COMMUNITY BOARD

dt8666 member Posts: 614	Huge 500 Build - Trex May 2, 2008 15:29:48 GMT 8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by dt8666 on May 2, 2008 15:29:48 GMT 8 Going to add here some build detail on Huge 500. This will be installed with TRex 450SE and stock setup The end result will as the picture. More detail coming soon as I am begining to take pictures while building.

dennisp member Sembawang Skunk Works Posts: 1,039	Huge 500 Build - Trex May 2, 2008 16:26:08 GMT 8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by dennisp on May 2, 2008 16:26:08 GMT 8 WOW that was a quick build DT....!!

dt8666 member Posts: 614	Huge 500 Build - Trex May 2, 2008 16:29:32 GMT 8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by dt8666 on May 2, 2008 16:29:32 GMT 8 Not yet sir. this is mine current model. The No2 is in production. Done the frame, now going into the Fuse soon.

ERJets member Posts: 940	Huge 500 Build - Trex May 2, 2008 16:48:12 GMT 8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ERJets on May 2, 2008 16:48:12 GMT 8 Does it comes ready painted? I think I am going into heli. Anyone willing to teach me on how to "Roti prata"?

dennisp member Sembawang Skunk Works Posts: 1,039	Huge 500 Build - Trex May 2, 2008 17:03:26 GMT 8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by dennisp on May 2, 2008 17:03:26 GMT 8 It is good fun, but the MOHA gets wild when I do my attempted grass cutting inthe lving area with my small E-Flite helicopter.. It is not as easy as it looks but could just be me.....

mechplas
member

Posts: 42

Huge 500 Build - Trex May 2, 2008 17:27:03 GMT 8

Quote

Post by mechplas on May 2, 2008 17:27:03 GMT 8

May 2, 2008 15:29:48 GMT 8 dt8666 said:

Going to add here some build detail on Huge 500.

This will be installed with TRex 450SE and stock setup

The end result will as the picture.

More detail coming soon as I am begining to take pictures while building.

nice project man!! Scale will always be nice. 8-)

dt8666
member

Posts: 614

Huge 500 Build - Trex May 2, 2008 18:10:38 GMT 8

Quote

Post by dt8666 on May 2, 2008 18:10:38 GMT 8

ER, it is pre painted. Check out the list of selection of Fuse from HeliArt at Skyhobbies!

1st, the rudder servo need to mount inverted and vertical using the original mount.

i304.photobucket.com/albums/nn178/dt8666/PIC_0653.jpg

Then remove the tail rotor assemble but have the tail boom on. You should have done servo position when the tail rotor are in place. this wau when you have the frame slot into the fuse, you won't have to drill hole to adjust the tail boom.

Willhave other update once I have the gyro fited and do some dry test.

dt8666 member Posts: 614	Huge 500 Build - Trex May 2, 2008 18:12:34 GMT 8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by dt8666 on May 2, 2008 18:12:34 GMT 8 oops! here is the picture of the tail servo And ER, you want Roti prata.. ask PUMA

dennisp member Sembawang Skunk Works Posts: 1,039	Huge 500 Build - Trex May 2, 2008 18:12:39 GMT 8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by dennisp on May 2, 2008 18:12:39 GMT 8 Confirm if you have to go JB on Sunday DT as I have the Gyro for you.