Post by ERJets on Apr 9, 2008 16:41:21 GMT 8
Some pictures of my F-22 Raptor powered by a PST 1300R Engine.
erjets.com/photo_13.html
Fuselage
I had seen a few jets from other manufacturers. I personally think that the fuselage from Skymaster has a better quality in terms of
moulding. It appears to be of perfect lay up thickness, strong and light with carbon cloth reinforcement at all high stress areas.
All joining lines on the fuselage are all very smooth and clean, on top of that you will not be able to find any pin holes on it.
No doubt this F-22 is a semi scale jet but all molded in panel lines are quite scale if you compare with the real jet.
Mine is an ARF version, so all formers are factory pre-installed.
1 : 10 Scale F-22
Length: 76 3/4" (1950mm).
Wingspan: 55" (1400mm).
Power: PST1300R
erjets.com/photo_13.html
Fuselage
I had seen a few jets from other manufacturers. I personally think that the fuselage from Skymaster has a better quality in terms of
moulding. It appears to be of perfect lay up thickness, strong and light with carbon cloth reinforcement at all high stress areas.
All joining lines on the fuselage are all very smooth and clean, on top of that you will not be able to find any pin holes on it.
No doubt this F-22 is a semi scale jet but all molded in panel lines are quite scale if you compare with the real jet.
Mine is an ARF version, so all formers are factory pre-installed.
1 : 10 Scale F-22
Length: 76 3/4" (1950mm).
Wingspan: 55" (1400mm).
Power: PST1300R
option nowadays!
